Lunatic768 Posted May 20, 2009 Share Posted May 20, 2009 Hi guysnot sure if this is the place for this, but here it goes (don't ban me!)i wanted to know what was the best way to make a homemade windcoverlately i've just made a tinfoil circle and crumpled the top, which has just kinda suckedit is either too hot or does nothing, and likes to blow away and knock my coalsi do not have any SB cans, which is what i found to be the most popular windcover substitutei was gonna try a arizona ice tea can nexti'm smoking a mya bambino, stock (mini) mya bowlany other thoughts?thanks Link to comment Share on other sites More sharing options...
Long Horn Hookah Posted May 20, 2009 Share Posted May 20, 2009 Back before I bought a real one I wrapped a Styrofoam cup in foil, maby 4 or 5 times. Only used it inside but had no problems with keeping it on. Iced tea can could work, but would heat up much hotter then you want it to be, causing temperature control and removal to be difficult. Do you want a windcover for indoor or outdoor use? Link to comment Share on other sites More sharing options...
AKammenzind Posted May 20, 2009 Share Posted May 20, 2009 Any sort of cans will work, just make sure you clean em real well. Saw off the bottom, cut some holes in for airflow, and rivet on a little handle and you're good to go. Link to comment Share on other sites More sharing options...
Kapten Kanel Posted May 20, 2009 Share Posted May 20, 2009 Just make one out of several layers of foil, works great! Link to comment Share on other sites More sharing options...
MadManMadrid Posted May 21, 2009 Share Posted May 21, 2009 no worries mate like they said any can will do as long as it can sit on your tray. personally my favorate is a can of juice one of the larger ones of grapefruit. i cut a 1 inch hole at the other end of the open side so it has a way for the heat to go out then with a drill i drilled holes all around on the side just randomly be sure and use a punch to make a lil indention so the drill bit has a place to start at or else it'll just go everywhere. it looks alright and i eventually took sharpie markers to it and still works great just grab from the bottom when you go to lift it. Link to comment Share on other sites More sharing options...
cartercdad Posted May 21, 2009 Share Posted May 21, 2009 i have a how to on this in youtube here is the link check it out let me know i have been using this for ever.How to Make a Monster Energy windcover Link to comment Share on other sites More sharing options...
Lunatic768 Posted May 21, 2009 Author Share Posted May 21, 2009 QUOTE (Long Horn Hookah @ May 20 2009, 12:55 AM) <{POST_SNAPBACK}>Do you want a windcover for indoor or outdoor use?i smoke outside, but i'm getting fed up with wind and i'm thinking about moving insideso i would say bothcartercdad, nice videoi don't have a dremel, but i'm definitely gonna try that Link to comment Share on other sites More sharing options...
Long Horn Hookah Posted May 22, 2009 Share Posted May 22, 2009 QUOTE (Lunatic768 @ May 21 2009, 06:35 PM) <{POST_SNAPBACK}>QUOTE (Long Horn Hookah @ May 20 2009, 12:55 AM) <{POST_SNAPBACK}>Do you want a windcover for indoor or outdoor use?i smoke outside, but i'm getting fed up with wind and i'm thinking about moving insideso i would say bothcartercdad, nice videoi don't have a dremel, but i'm definitely gonna try thatIf you have a hand held can opener, you can use that instead. Usta cut the top off of beer cans that way. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now