Jump to content

Fogger V4 Build

Chreees

By Chreees
in Vaping Discussion

 Share

Recommended Posts

Chreees Newbie

Chreees

Posted
Posted
FINALLY had time to build my Fogger v4 RBA. Got it down to .8 ohms. Wasn't too hard- hardest part was trying to keep the coils where I wanted them after screwing them onto the posts- which was a pain in the ass in itself. Anyway, here's pics of my build-

Coils finally on:
asysy9ev.jpg

Burning:
davesa6u.jpg

Cotton on:
begevyma.jpg

Cotton wet so I could screw the chamber piece on:
yteru4e7.jpg

Voila!
epynaqe8.jpg

And proof it lives up to its name:
muvybeha.jpg

And while I was at it, I rebuilt my TOBH Atty. Got it down to .8 ohms as well:
epuqygu7.jpg

ry5uda4a.jpg

4e8y3y7e.jpg


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites
â€On Newbie

â€On

Posted
Posted

Looks good dude! Only thing I noticed that's off is in that bottom pic it looks like the two coils have a different amount of wraps. Even one wrap can usually make one heat up noticeably faster than the other

Link to comment
Share on other sites
Chreees Newbie

Chreees

Posted
  • Author
Posted
You're probably right. I did a pretty quick job with it. I'll probably go back and rebuild so they match. Overall though, I was satisfied with how they heated up.


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites
Travis Newbie

Travis

Posted
Posted

Looks good dude! Only thing I noticed that's off is in that bottom pic it looks like the two coils have a different amount of wraps. Even one wrap can usually make one heat up noticeably faster than the other

 

Yup, once you build more you'll quickly learn what you like. I don't consider myself a sub-ohm elitist or anything, but a few months ago I loved staying around the 0.8-0.6 ohm range, and now I rarely go above 0.5 ohms. I can still enjoy a 1.whatever coil, but I get true satisfaction around the 0.3 ohm resistance. 

Other than that your coils look good from what I can see! Keep trying new things!

Link to comment
Share on other sites
Chreees Newbie

Chreees

Posted
  • Author
Posted
Thanks. Yeah, I am finding the lower I go, the happier I get.

I just found out what happened on my coils for the last pic for the Atty build. One of my wraps on the end somehow came undone. I'll have to fix that today sometime before I use it again. For today I'll be rocking the Fogger. :) Which is good because it looks like I'll be driving through a monsoon to work so dripping while driving would be quite difficult.

Also, quick note about the Fogger wicking... I shouldn't have made the cotton as long, meaning it shouldn't be as deep in the channels. I am getting a dry hit if I chain vape, so after about 4-5 hits, I get a dry hit. I have to wait a minute before I can hit again. Looked it up and turns out the wicking is the reason. It should only be about halfway down the vertical part of the L-shaped channel. Just though I'd mention this in case anyone was unaware. I'll keep it as-is for now and just worry about it when I rewick.


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites
Chreees Newbie

Chreees

Posted
  • Author
Posted

Looks good. Personally, I like faster/looser draw than that, but that's just me. I like to be able to basically just breathe in normally and exhale a thunderstorm.

 

I just tried that (inhaling normally) and it seemed to put out about the same amount of vapor... Maybe I've been inhaling wrong all along?!

 

I've got the airholes completely open, so it's definitely a loose draw. Guess I was just so used to my Aro tanks from before.

Link to comment
Share on other sites
Codyb88 Newbie

Codyb88

Posted
Posted

Quick video showing her in action:
 
http://vid124.photobucket.com/albums/p40/INCUBUSRATM/Vaping/A592C8FA-15BC-42B6-AF82-9B7FDF618C3C_zpsqjwz7i24.mp4


Impressive man. You disappeared for a moment. I have to see how you wicked that. You may also have a better version like a 4.4 apparently the v4 has had multiple iterations on the build. I just wish they'd put holes in a post like a damn dripper in a tank.
Link to comment
Share on other sites
Chreees Newbie

Chreees

Posted
  • Author
Posted

 

That is impressive. How much did that cost? How much for refills on the juice?

 

 

Here's everything I bought to get me into mechanical mods:

 

-Nemesis Clone Mech Mod + TOBH Atty v2 atomizer: http://www.ebay.com/itm/191224426366?var=490365099415&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

 

-Fogger v4 RBA: http://www.ebay.com/itm/281342986736?var=580374862245&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

 

-2 Sony batteries (I use one for 2 days, then swap it out with the other, keeping one on the charger at all times): http://www.ebay.com/itm/151328525849?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

 

-Battery charger that turns off when the battery is fully charged: http://www.ebay.com/itm/221270760556?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

 

-Micro torch (not necessary, as you can simply burn the coils once on the mod, but I find it to be easier sometimes to pre-torch before installing them): http://www.ebay.com/itm/111358755195?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

 

Use organic cotton for wicking (can be found at Walgreens and other stores).

 

For juice, I mainly use MountBakerVapor.com. They start at $4.99. I get it mixed Max VG, 3mg nicotine, and 2 extra flavor shots. Emulates hookah very well. But juice prices vary. I found MBV to be pretty much the best price for decent juice, why I go with them mostly.

 

 

Quick video showing her in action:
 
http://vid124.photobucket.com/albums/p40/INCUBUSRATM/Vaping/A592C8FA-15BC-42B6-AF82-9B7FDF618C3C_zpsqjwz7i24.mp4


Impressive man. You disappeared for a moment. I have to see how you wicked that. You may also have a better version like a 4.4 apparently the v4 has had multiple iterations on the build. I just wish they'd put holes in a post like a damn dripper in a tank.

 

 

Thanks dude. Here's how I wicked it, but next time I'm not going to have the cotton go down as far into the channels:

 

[URL=http://s124.photobucket.com/user/INCUBUSRATM/media/Vaping/397A2CCB-2A3D-43C4-B4E6-754146D18CB9_zps4sta2gaz.jpg.html]397A2CCB-2A3D-43C4-B4E6-754146D18CB9_zps[/URL]

 

And yeah, I read the same thing online about them having different versions of the v4. Whatever mine is, I guess it's a good one because so far, so good. I HATE having to install the coils onto the screw posts! So dumb that there are no holes. :wallbash:

Link to comment
Share on other sites
Chreees Newbie

Chreees

Posted
  • Author
Posted
IMO, once you get the essentials (one mod, an RBA, an RDA, couple batteries, good battery charger, 100ft spool of kanthal, a large quantity of cotton), all you're really out for a long time is juice. I could vape 5ml probably a day if I chain-vaped, but usually I'd say I probably vape around 2ml a day, if that. That's mainly just me vaping at work. So $4.99 per 15ml from MBV, that's way cheaper than hookah tobacco, I think. Not to mention the essentials I listed cost less than the cost of one new hookah these days.


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites
Chreees Newbie

Chreees

Posted
  • Author
Posted

I've been going through about 15-20 mils per day. Shit lol. Didn't even realize it until just now.


Sent from my iPhone using Tapatalk


Damn dude! No way I could do that. We should post a poll thread asking how much everyone vapes per day... Someone mind doing the honors?


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...